Cisco Systems SPS224G4 Manual De Usuario
24
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
306
RADIUS Commands
radius-server host
The radius-server host Global Configuration mode command specifies a RADIUS
server host. Use the no form of this command to delete the specified RADIUS host.
server host. Use the no form of this command to delete the specified RADIUS host.
Syntax
radius-server host {
ip-address
|
hostname
} [auth-port
auth-port-number
] [acct-
port
acct-port-number
] [timeout
timeout
] [retransmit
retries
] [deadtime
deadtime
]
[key
key-string
] [source
source
] [priority
priority
] [usage
type
]
no radius-server host {
ip-address
|
hostname
}
Parameters
•
ip-address
— IP address of the RADIUS server host.
•
hostname
— Hostname of the RADIUS server host. (Range: 1-158
characters)
•
auth-port-number —
Port number for authentication requests. The host is
not used for authentication if the port number is set to 0. (Range: 0-65535)
•
acct-port-number
— Port number for accounting requests. The host is not
used for accountings if set to 0.
•
timeout
— Specifies the timeout value in seconds. (Range: 1-30)
•
retries
— Specifies the retransmit value. (Range: 1-10)
•
deadtime
— Length of time in minutes during which a RADIUS server is
skipped over by transaction requests. (Range: 0-2000)
•
key-string
— Specifies the authentication and encryption key for all
RADIUS communications between the device and the RADIUS server. This