Cisco Systems SPS224G4 Manual De Usuario

radius-server host

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

307

key must match the encryption used on the RADIUS daemon. To specify an 
empty string, enter “”. (Range: 0-128 characters)

•

source

 — Specifies the source IP address to use for communication. 0.0.0.0 

is interpreted as request to use the IP address of the outgoing IP interface. 

•

priority

 — Determines the order in which servers are used, where 0 has the 

highest priority. (Range: 0-65535)

•

type

 — Specifies the usage type of the server. Possible values: login, 

dot.1x, wireless or all.

No RADIUS server host is specified.

The port number for authentication requests is 1812.

The port number for accounting requests if not specified is 1813

The usage type is all.

Global Configuration mode

To specify multiple hosts, multiple radius-server host commands can be used. 

If no host-specific timeout, retries, deadtime or key-string values are specified, 
global values apply to each RADIUS server host.

The address type of the source parameter must be the same as the 

ip-address

 

parameter.

The following example specifies a RADIUS server host with IP address 
192.168.10.1, authentication request port number 20 and a 20-second timeout 
period.