Cisco Systems SPS224G4 Manual De Usuario
Spanning Tree Commands
spanning-tree priority
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
370
28
Example
The following example configures the spanning tree bridge maximum-age to 10
seconds.
seconds.
Console(config)# spanning-tree max-age 10
spanning-tree priority
The spanning-tree priority Global Configuration mode command configures the
spanning tree priority of the device. The priority value is used to determine which
bridge is elected as the root bridge. Use the no form of this command to restore
the default configuration.
spanning tree priority of the device. The priority value is used to determine which
bridge is elected as the root bridge. Use the no form of this command to restore
the default configuration.
Syntax
spanning-tree priority
priority
no spanning-tree priority
Parameters
•
priority
— Priority of the bridge. (Range: 0-61440 in steps of 4096)
Default Configuration
The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.
Command Modes
Global Configuration mode
User Guidelines
The bridge with the lowest priority is elected as the root bridge.