Cisco Systems SPS224G4 Manual De Usuario
Spanning Tree Commands
spanning-tree cost
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
372
28
spanning-tree cost
The spanning-tree cost Interface Configuration mode command configures the
spanning tree path cost for a port. Use the no form of this command to restore the
default configuration.
spanning tree path cost for a port. Use the no form of this command to restore the
default configuration.
Syntax
spanning-tree cost
cost
no spanning-tree cost
Parameters
•
cost —
Path cost of the port (Range: 1-200,000,000)
Default Configuration
Default path cost is determined by port speed and path cost method (long or
short) as shown below:
short) as shown below:
Command Modes
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
The path cost method is configured using the spanning-tree pathcost method
Global Configuration mode command.
Global Configuration mode command.
Interface
Long
Short
Port-channel
20,000
4
Gigabit Ethernet (1000 Mbps)
20,000
4
Fast Ethernet (100 Mbps)
200,000
19
Ethernet (10 Mbps)
2,000,000
100