Cisco Systems SPS224G4 Manual De Usuario
Syslog Commands
logging buffered
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
423
30
Default Configuration
The default severity level is informational.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example limits logging messages displayed on the console to
severity level errors.
severity level errors.
Console(config)# logging console errors
logging buffered
The logging buffered Global Configuration mode command limits syslog
messages displayed from an internal buffer based on severity. Use the no form of
this command to cancel using the buffer.
messages displayed from an internal buffer based on severity. Use the no form of
this command to cancel using the buffer.
Syntax
logging buffered
level
no logging buffered
Parameters
•
level
— Specifies the severity level of messages logged in the buffer. The
possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational, debugging.
notifications, informational, debugging.