Cisco Systems SPS224G4 Manual De Usuario
Syslog Commands
logging buffered size
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
424
30
Default Configuration
The default severity level is informational.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits the
messages displayed to the user.
messages displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer
based on severity level debugging.
based on severity level debugging.
Console(config)# logging buffered debugging
logging buffered size
The logging buffered size Global Configuration mode command changes the
number of syslog messages stored in the internal buffer. Use the no form of this
command to restore the default configuration.
number of syslog messages stored in the internal buffer. Use the no form of this
command to restore the default configuration.
Syntax
logging buffered size
number
no logging buffered size
Parameters
•
number
— Specifies the maximum number of messages stored in the
history table. (Range: 1 - 400)