Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. SPS224G4
  5. Manual De Usuario

Cisco Systems SPS224G4 Manual De Usuario

Descargar
Página de 552
VLAN Commands
switchport general pvid
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
494
34
 
switchport general pvid
The switchport general pvid Interface Configuration mode command configures 
the PVID when the interface is in general mode. Use the no form of this command 
to restore the default configuration.
Syntax
switchport general pvid 
vlan-id
no switchport general pvid
Parameters
•
vlan-id —
 Specifies the PVID (Port VLAN ID).
Default Configuration
If the default VLAN is enabled, PVID = 1. Otherwise, PVID=4095.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the PVID for Ethernet port 1, when the interface 
is in general mode.
Console(config)# interface ethernet 1
Console(config-if)# switchport mode general
Console(config-if)# switchport general pvid 234