Cisco Systems SPS224G4 Manual De Usuario
VLAN Commands
switchport general acceptable-frame-type tagged-only
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
496
34
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface
Configuration mode command discards untagged frames at ingress. Use the no
form of this command to restore the default configuration.
Configuration mode command discards untagged frames at ingress. Use the no
form of this command to restore the default configuration.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1 to discard untagged frames at
ingress.
ingress.
Console(config)# interface ethernet 1
Console(config-if)# switchport mode general
Console(config-if)# switchport general acceptable-frame-type
tagged-only