Cyclades User's Guide Manual De Usuario

Connecting Servers to the KVM Ports

80  

b. Obtain the information you need to identify the authentication server on 

the KVM/net from the server’s administrator. 

c. After the KVM/net is installed, make sure to specify the desired 

authentication method for the ports that are connected to each server. 

See “Security” on page 44 for background information and see 
“Network” on page 226 for the procedure.

3. Because some components of connected equipment may not be hot 

pluggable, make sure all servers are powered off.

T

Do these steps after completing “To Prepare to Connect Servers to the KVM/
net” on page 79.

1. Select the appropriate Terminator. 

2. Connect the appropriate keyboard and mouse connectors. 

To avoid system conflicts connect the Terminator to the server in 
the following order.

•

On a PS/2 Terminator for a PC server, first connect the Terminator’s 

green connector to the server’s mouse port, and then connect the 
Terminator’s purple keyboard connector to the server’s keyboard port.

•

On a USB Terminator for a PC or a Sun server, connect the 

Terminator’s USB connector to the USB port on the server.