Cyclades User's Guide Manual De Usuario

Installation

81

                                 Connecting Servers to the KVM Ports

 

 

•

On a Mini-DIN Terminator for a Sun server, connect the Terminator’s 

Mini-DIN connector to the Mini-DIN port on the server.

3. Connect the Terminator’s VGA (HD-15 male) connector to the computer’s 

VGA (monitor) port. Tighten both screws firmly but do not over-tight 
them.

Note: Two activity LEDs are located on the terminator. The “Link” LED displays a 

solid amber light when the terminator connects to the server. The “On” LED 
displays a blinking green light when the terminator is on. 

4. To extend the connection from the computer to the KVM/net, connect an 

RJ-45 to RJ-45 CAT5 cable up to 500 feet long to the Terminator.