Nortel Networks 2000 Manual De Usuario
132 Chapter 2 Network configuration
208700-B
Figure 41 Client/server configuration example
For detailed information about configuring trunks, see Chapter 3.
Before you configure trunks
When you create and enable a trunk, the trunk members (switch ports) take on
certain settings necessary for correct operation of the MultiLink Trunking feature.
certain settings necessary for correct operation of the MultiLink Trunking feature.
Before you configure your MultiLink Trunk, you must consider these settings,
along with specific configuration rules, as follows:
along with specific configuration rules, as follows:
1
Read the configuration rules provided in the next section,
.”
2
Determine which switch ports (up to four) are to become trunk members (the
specific ports making up the trunk). A minimum of two ports are required for
each trunk.
specific ports making up the trunk). A minimum of two ports are required for
each trunk.
T2
S2
S3
T3
T4
F
S4
T5
F
S1
9806EA
FS1
FS2
T1
Business
Policy Switch 2000
Business
Policy Switch 2000
Business
Policy Switch 2000
Business
Policy Switch 200