3com 7000 Manual De Usuario

 

 

 

If you are using the Bridge/Router Module to connect to a remote site 

 

over a leased line link, the initial setup is very simple.

 

 

Before you power on the unit, connect an appropriate WAN cable to 

 

the WAN ports on the rear of the unit. If you have already powered on 

 

the unit, switch it off and connect the cable.

 

For information about suitable cables, see 

 

 

.

 

 

Power on the unit and connect to the management system.

 

 

Type 

 

 

 

 and then confirm with 

 

.

 

The unit automatically configures the WAN ports to the appropriate 

 

line speed.

 

 

Refer to the 

 

 guide 

 

and edit the WAN port’s configuration as follows:

 

 

From the main menu, enter 

 

.

 

 

Highlight the WAN port you want to edit.

 

 

Enter 

 

 to display the Edit WAN Port screen shown in 

 

 

 

 

Edit WAN Port Screen