3com WX3000 Manual De Usuario
1-29
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable MSTP
stp enable
Required
MSTP is disabled by default.
MSTP is disabled by default.
Enter Ethernet port view
interface
interface-type
interface-number
—
Disable MSTP on the
port
port
stp disable
Optional
By default, MSTP is enabled on all ports after
you enable MSTP in system view.
To enable a device to operate more flexibly,
you can disable MSTP on specific ports. As
MSTP-disabled ports do not participate in
spanning tree calculation, this operation saves
CPU resources of the device.
By default, MSTP is enabled on all ports after
you enable MSTP in system view.
To enable a device to operate more flexibly,
you can disable MSTP on specific ports. As
MSTP-disabled ports do not participate in
spanning tree calculation, this operation saves
CPU resources of the device.
You are not recommended to enable MSTP on GigabitEthernet 1/0/29 on the switching engine of the
WX3024, GigabitEthernet 1/0/11 on the switching engine of the WX3010 or GigabitEthernet 1/0/9 on
the switching engine of the WX3008.
WX3024, GigabitEthernet 1/0/11 on the switching engine of the WX3010 or GigabitEthernet 1/0/9 on
the switching engine of the WX3008.
Other MSTP-related settings can take effect only after MSTP is enabled on the device.
Configuration example
# Enable MSTP on the device and disable MSTP on GigabitEthernet 1/0/1.
1) Perform this configuration in system view
<device> system-view
[device] stp enable
[device] stp interface GigabitEthernet1/0/1 disable
2) Perform this configuration in Ethernet port view
<device> system-view
[device] stp enable
[device] interface GigabitEthernet1/0/1
[device-GigabitEthernet1/0/1] stp disable
Configuring Leaf Nodes
Complete the following tasks to configure a leaf node:
Task
Remarks
Required
To prevent network topology jitter caused by other
related configurations, you are recommended to
enable MSTP after performing other configurations.
To prevent network topology jitter caused by other
related configurations, you are recommended to
enable MSTP after performing other configurations.
Required