Optiquest iRIS 320 Manual De Usuario
iRIS 220 / iRIS 320, V1.19 User Guide - 8
8
iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: iquest@iquest.co.nz
2.6 Technical Specifications – iRIS 220
Dimensions:
100mm x 172mm x 40mm (3.93in x 6.77in x 1.57in)
(Excluding connectors)
Mass:
380g (13.4oz)
Power Supply:
External regulated 12V dc power supply or rechargeable sealed lead-acid battery.
Charger Source - External 15-30V dc supply. Supports a directly connected solar
panel (no regulator required).
panel (no regulator required).
Power Consumption:
Less than 3mA @ 12V in idle mode and full power save mode selected.
Actual current consumption is dependent on power management mode, wireless
modem state and I/O configuration.
Actual current consumption is dependent on power management mode, wireless
modem state and I/O configuration.
Comms Interfaces:
1x RS232 DB9, 38400 bps, DTE configuration.
1x Integral dual-band (900/1800MHz) GSM/GPRS modem or
Integral single-band (1900MHz) GSM/GPRS modem or
Integral CDMA/CDMA-X modem
1x Integral dual-band (900/1800MHz) GSM/GPRS modem or
Integral single-band (1900MHz) GSM/GPRS modem or
Integral CDMA/CDMA-X modem
Digital I/O:
2 x Digital Inputs
- 30Vdc maximum input, switch to 0Vdc to activate.
- Link selectable for either mechanical (<20Hz) or electronic (<5kHz) switching.
2 x Digital Outputs
- 1 x Switched 12V out (max 300mA)
- 1 x Open-drain pull-down (max 300mA @ 30V)
- 30Vdc maximum input, switch to 0Vdc to activate.
- Link selectable for either mechanical (<20Hz) or electronic (<5kHz) switching.
2 x Digital Outputs
- 1 x Switched 12V out (max 300mA)
- 1 x Open-drain pull-down (max 300mA @ 30V)
Analog I/O:
4 x 12 bit uni-polar analog inputs. Range 0-5000mV. Input impedance 98k
Ω
.
Referenced to 0V common. Internal measurements available for monitoring are:
•
Battery Voltage
•
Supply Voltage
•
Internal Temperature (
°
C or
°
F)
•
Received Signal Strength Indication (RSSI)
Logging Memory:
Non-volatile 2MB flash storage of 262,144 time/date stamped data points. Circular
buffer mode (overwrites oldest data when memory is full).
A typical site with 2 parameters logged every 15 minutes plus battery voltage logged
hourly will give 3.3 years of storage before data overwrite occurs.
buffer mode (overwrites oldest data when memory is full).
A typical site with 2 parameters logged every 15 minutes plus battery voltage logged
hourly will give 3.3 years of storage before data overwrite occurs.
Clock/Calendar:
Non-volatile with integral lithium back-up battery. Leap year recognition. Accurate to
+/-20 secs month, trimmable via a configuration register.
+/-20 secs month, trimmable via a configuration register.
Mounting:
4 x M4 (3/16”) mounting holes at ends of case.
Environmental:
Storage Temperature: -20
°
C - +85
°
C. (-4
°
F - +185
°
F)
Operating Temperature: -10
°
C - +70
°
C. (14
°
F - +158
°
F)