3com 10014917 Manual De Usuario
3Com Switch 4200G Family
29
Command Reference
primary authentication
Use the
primary authentication
command to configure the IP address and port number for the primary
RADIUS authentication/authorization server.
RADIUS Server Group view
priority
Use the
priority
command to set the priority of Ethernet port.
Ethernet Port view
priority trust
Use the
priority trust
command to configure the precedence mapping mode on the port of the switch.
Ethernet Port view
protocol inbound
Use the
protocol inbound
command to configure the protocols supported in the current user interface.
VTY User Interface view
protocol inbound
Use the
protocol inbound
command to specify the protocols supported by the user interface.
User Interface view
protocol-priority protocol-type
Use the
protocol-priority
command to set the global traffic priority that applies to a given protocol.
System view
protocol-vlan
Use the
protocol-vlan
command to specify a VLAN is a specified type of protocol-based VLAN.
VLAN view
public-key-code begin
Use the
public-key-code begin
command to enter public key edit view and input the client public key.
Public Key view
public-key-code begin
Use the
public-key-code begin
command to enter public key edit view and set server public keys.
Public Key view
public-key-code end
Use the
public-key-code end
command to return from public key edit view to public key view and save the
public keys you set.
Public Key Edit view
public-key-code end
Use the
public-key-code end
command to return from public key edit view to public key view and save the
public keys you set.
Public Key Edit view
put
Use the
put
command to upload a local file to the remote SFTP server.
SFTP Client view
put
Use the
put
command to upload a local file to the remote FTP server.
FTP Client view
pwd
Use the
pwd
command to display the current directory on the SFTP server.
SFTP Client view
pwd
Use the
pwd
command to display the current path. If the current path is not configured, an error occurs when
you execute this command.
User view
pwd
Use the
pwd
command to display the current directory on the remote FTP Server.
FTP Client view
qos cos-drop-precedence-map
Use the
qos cos-drop-precedence-map
command to configure the "COS->Drop-precedence" mapping
relationship.
System view
qos cos-dscp-map
Use the
qos cos-dscp-map
command to configure the "COS->DSCP" mapping relationship.
System view