3com 10014917 Manual De Usuario
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
30
3Com Switch 4200G Family
Command Reference
qos cos-local-precedence-map
Use the
qos cos-local-precedence-map
command to configure the "COS->Local-precedence" mapping
relationship.
System view
qos dscp-cos-map
Use the
qos dscp-cos-map
command to configure the "COS->802.1p priority" mapping relationship.
System view
qos dscp-drop-precedence-map
Use the
qos dscp-drop-precedence-map
command to configure the "DSCP->Drop-precedence" mapping
relationship.
System view
qos dscp-dscp-map
Use the
qos dscp-dscp-map
command to configure the "DSCP->DSCP" mapping relationship.
System view
qos dscp-local-precedence-map
Use the
qos dscp-local-precedence-map
command to configure the "DSCP->Local-precedence"
mapping relationship.
System view
qos-profile
Use the
qos-profile
command to create a QoS profile and enter the corresponding view.
System view
qos-profile port-based
Use the
qos-profile port-based
command to configure the port-based application mode of QoS profiles
on ports.
Ethernet Port view
queue-scheduler
Use the
queue-scheduler
command to set the queue-scheduling algorithm and parameters.
System view
quit
Use the
quit
command to terminate the connection to the remote SSH server.
User view
quit
Use the
quit
command to terminate the connection to the remote SFTP server and exit to system view.
SFTP Client view
quit
Use the
quit
command to terminate FTP control connection and FTP data connection and quit to user view.
This command has the same effect as that of the bye command.
FTP Client view
quit
Use the
quit
command to return from current view to lower level view, or exit the system if current view is
user view.
Any view
radius nas-ip
Use the
radius nas-ip
command to set the source IP address used by the switch to send RADIUS packets.
System view
radius-scheme
Use the
radius-scheme
command to specify the RADIUS scheme to be used by the current ISP domain.
ISP Domain view
radius scheme
Use the
radius scheme
command to create a RADIUS scheme and enter its view.
System view
radius trap
Use the
radius trap
command to enable the switch to send trap messages when its RADIUS
authentication or accounting server turns down.
System view
reboot
Use the
reboot
command to restart an Ethernet switch.
User view
Web command: Administration -> Reboot