SMC Networks 10/100/1000 SMCGS8P-Smart Manual De Usuario

3-72

This command provides information on the community access 
strings, counter information for SNMP input and output 
protocol data units, and whether or not SNMP logging has been 
enabled with the snmp-server enable traps command.

Console#show snmp

SNMP traps:
 Authentication: enable
   Link-up-down: enable

SNMP communities:

0 SNMP packets input
    0 Bad SNMP version errors
    0 Unknown community name
    0 Illegal operation for community name supplied
    0 Encoding errors
    0 Number of requested variables
    0 Number of altered variables
    0 Get-request PDUs
    0 Get-next PDUs
    0 Set-request PDUs
0 SNMP packets output
    0 Too big errors
    0 No such name errors
    0 Bad values errors
    0 General errors
    0 Response PDUs
   0 Trap PDUs

SNMP logging: disabled
SNMP ip filter group:
    1. IP:10.1.2.3 Mask:255.255.255.255 valid
    2. IP:10.1.3.0 Mask:255.255.255.0 valid
Console#

b_mgmt.book  Page 72  Tuesday, July 8, 2003  5:24 PM