GarrettCom Quad Manual De Usuario

Magnum Quad-Series Fiber Switches 

Installation and User Guide (06/03) 

 

     

See procedure in Section 3.9.1 above.  

To properly remove a QPM card from the Fiber Switch, follow the 3 steps    

below.  

 

-front of the unit there are two retaining screws for each QPM 

crews are used to secure a QPM card in 

move the front screws first and then screw 

  

If the slot from which the QPM card has been removed is to remain unused, be 

sure to install a QPM face plate cover in it.  If another QPM card is replacing 

the one that has been removed, follow the steps as described for installing a 

QPM card discussed in Section 3.9.1. 

On the bottom

card and face plate slot. These s

position (see Figure 3.9.3a).  Re

mounted on the rear-top of the QPM to be removed. 

 

 

 

Gently pull the QPM card up and out of the connector socket (see Fig.3.9.3b).

  1

QPM CARDS

J1      J2       J3

J4

Two retaining screws on the rear top  of
module

 

  1

QPM CARDS

J1      J2       J3
J4

 

29 

.

.