GarrettCom 6K32 Manual De Usuario

Magnum 6K32 Managed Switch            Installation and User Guide (02/05) 

 

9 

.

.

 

 

In an eight-port SFF fiber port module, all of the fiber ports are of the same 

speed (100Mb), mode, and connector type. Models are available with Small Form Factor 

(SFF) are multi-mode MT-RJ or LC-type connectors, and single-mode LC-type 

connectors.  

The 100Mb fiber eight-

port modules for the Magnum 

6K32’s normally are set (factory 

default) to operate in full-duplex 

mode for best fiber distance and 

performance. Using the 6K32’s  

MNS software, the user may select full- or half-duplex mode per-port through set-up of 

the software (See Magnum 6K32 MNS Software Manual) for the flexibility to adapt to 

any FDX or HDX type of Fast Ethernet devices).  

There are three LED’s per fiber port. The Link (LK) LED indicates “ready for 

operation” on that port when lit, the F/H LED indicates operation in full-duplex mode 

when ON (half-duplex when OFF), and the blinking ACT LED indicates receiving 

Activity on the port. A fiber cable must be connected into a SFF port and the Link (LK) 

indicator for that port must be ON (indicating there is a powered-up device at the other 

end of the cable) in order for a LK LED to provide valid indications of operating 

conditions on that port. 

ACT

F/H

ACT

F/H
ACT

F/H

ACT

F/H

ACT

F/H

ACT

 

F/H

 

ACT

 

F/H

 

ACT

 

F/H

 

ACT

 

F/H