GarrettCom 6K16V Manual De Usuario

Magnum 6K16V Managed Fiber Switch         Installation and User Guide (06/04)

 

operation” on that port when lit, the F/H LED indicates operation in full-duplex mode 

when ON (half-duplex when OFF), and the blinking ACT LED indicates receiving 

Activity on the port. A fiber cable must be connected into a SFF port and the Link (LK) 

indicator for that port must be ON (indicating there is a powered-up device at the other 

end of the cable) in order for a LK LED to provide valid indications of operating 

conditions on that port. 

Eight-Port Copper Module, 6K8-RJ45      

The 6K16V’s 8-

port Copper port module, 

model 6K8-RJ45, provides 

eight 10/100Mb switched RJ-

45 ports. The 10/100Mb 

switched ports normally (as a 

default setting) are 

independently N-way auto-

negotiating for operation at 10 or 100Mb speed in full- or half-duplex mode, i.e., each 

independently selects a mode and speed to match the device at the other end of the 

twisted pair cable.  (See Section 4.3 for auto-negotiation details) 

        2                   4                      6                  8

 H

ACT

F/

 

On the model 6K8-RJ45 module, there are four LEDs for each port, two in the 

connector and two separate.  The LK (Link) LED indicates “ready for operation” on that 

port when lit. The blinking ACT (Activity) LED indicates receiving Activity on that port 

when lit. The 10/100 LED indicates operation at 100Mb speed when ON and at 10 Mb 

speed when OFF (when auto-negotiation is not disabled). The FDX/HDX LED is ON to 

indicate full-duplex operation and OFF to indicate half-duplex mode. A twisted pair 

cable must be connected into an RJ-45 port and the Link (LK) indicator for that port must 

be ON (indicating there is a powered-up device at the other end of the cable) in order for 

a LK LED to provide valid indications of operating conditions on that port.  

Using the 6K16V’s  MNS software, the user may disable auto-negotiation and 

fix the desired operation of each RJ-45 port. MNS Software set-up may  select 10Mb or 

100Mb speed and full- or half-duplex mode per-port as per user requirement. (See 

Magnum 6K16V  MNS Software Manual for details info.). 

The combo six-port modules are combinations of copper and fiber media, 

 

9

.

.