GarrettCom 6K16V Manual De Usuario

Magnum 6K16V Managed Fiber Switch         Installation and User Guide (06/04)

 

module allow to connect the 100Mb demand of  Switch devices. It supports distances 

according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-

mode for 10Km distance may be available as a special order). 

 

 

Each port has an Activity (ACT) LED indicating packets being 

received, a Link (LK) LED indicating proper connectivity with the remote device when 

lit, and  FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off). 

5.2.2. 6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC 
 

The Magnum 6KP6-

RJMSC is also a Combo 6 Port 

module equipped with 4 10/100Mb 

RJ-45 ports along with 2 multi-

mode 100Mbps fiber optic 

transceivers all in one module.  This 

is similar to the 6K6-RJMST. It has 

the same LEDs indicating port 

activity (ACT), Link (LK), and 

FDX / HDX and 10/100 operation, and the same face-plate lettering.  

 

 

4

 

 

While the functionality of these two modules is essentially the same, the 6KP6-

RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type. 

The Magnum 6KP6-RJSSC 

is also a Combo module 

equipped with 4 dual speed 

copper ports and 2 Single-

mode SC-type connectors. It 

provides an advantage 

through combining copper 

and Fiber functions in one 

module of the 6K16V Switch 

supporting four Copper and two single-mode fiber network segments.  

 

4

 

The 6KP6-RJSSC, when installed in a Magnum 6K16V Switch operates on 

copper at the 100m distance.  The Fiber is single-mode and cable lengths can be as much 

 

40

.

.