GarrettCom 6K16V Manual De Usuario

Descargar
Página de 63
Magnum 6K16V Managed Fiber Switch         Installation and User Guide (06/04)
 
as 25+ Km (see Power Budget, Section 4.5) 
Each port has an Activity (ACT) LED indicating packets being received, a 
Link (LK) LED that indicates proper connectivity with the remote device when lit, and a 
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 
10/100 LED indicates 100Mbps speed when lit and 10Mbps  speed when off. To 
distinguish the single-mode 6 K6-RJSSC from the multi-mode 6K6-RJMSC, the label 
“Sgl. M.” is at the top of the faceplate of the 6K6-RJSSC.   
 
5.2.4 
6KP6-RJSSCL 4 @ 10/100 Mb copper port and 2@100Mbps single-mode 
FX-SC-type, “snap-in” connector  
The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual speed copper 
ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a combination of  
copper and Fiber functions in one module to the 6K16V Switches, supporting four 
Copper and two single-mode (Long-Reach) fiber network segments.  
The 6KP6-RJSSC, when installed in a Magnum 6K16V Switch has copper 
supporting the 100m distance and Fiber supporting single-mode fiber cable lengths of as 
much as 40+ Km (see Power Budget, Section 4.5) 
Each port has an Activity (ACT) LED indicating packets being received, a 
Link (LK) LED indicating proper connectivity with the remote device when lit, and a 
FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). The 
10/100 LED indicates the speed for the copper port, which is 100Mbps when the LED is 
ON and 10 Mb  when the LED is OFF.  
5.2.4a 
6KP6-RJ10ST 4 @ 10/100 Mb copper port and 2@10Mbps multi-mode 
FL-ST-type, “twist-lock” connector  
The Magnum 6KP6-RJ10ST is also a Combo module equipped with 4 dual speed copper 
ports and 2 multi-mode 10 Mb fiber ST-type connectors. It provides a combination of  
copper and Fiber functions in one module to the 6K16V Switches, supporting four 
Copper and two 10Mb of ST fiber network segments.  
The 6KP6-RJ10ST, when installed in a Magnum 6K16V Switch has copper 
supporting the 100m distance and Fiber supporting multi-mode fiber cable allow to 
connect the legacy network of 10Mb requirement in the network. Each port has an 
Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating 
proper connectivity with the remote device when lit, and a FDX/HDX LED indicating 
full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the 
speed for the copper port, which is 10Mbps when the LED is ON and 10 Mb  when the 
 
41
www  GarrettCom  com
.
.