GarrettCom 6K16V Manual De Usuario
Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04)
connecting to a hub or another switch.
The switch is configured as (=) position by default settings from the factory, the left-most
RJ-45 port is used for segments going to workstations and other user node device
connections as other ports of the module. For cascaded and up-link connections (i.e.: a
connection to another hub or switch typically), the uplink switch should be in the OUT
(X) position.
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, a
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off), and a
“10/100” LED indicating 100Mb when lit (or 10 Mbps when off).
Important Note: For the 6KP8-RJ45 Crossover Switch-Inside
is set for (=) by default from the factory for the Port # 1
and act similar as other user port. The location of crosss-over switch
can be seen in the fig 3.5.2.c( RJ-45 module) at page no 27.
and act similar as other user port. The location of crosss-over switch
can be seen in the fig 3.5.2.c( RJ-45 module) at page no 27.
The RJ-45 pins normally (TP crossover switch) are per the standard for hubs-to-
users twisted pair wiring: 1 = receive+, 2 = receive-, 3 = transmit+, 6 = transmit-,
other pins not used. When the TP crossover push-button is UP, the pins of the RJ-
45 port are per the standard for up-links using twisted pair wiring, i.e., the transmit
and the receive pairs are exchanged: 1 = transmit+, 2 = transmit-, 3 = receive+, 6 =
receive-, other pins not used.
users twisted pair wiring: 1 = receive+, 2 = receive-, 3 = transmit+, 6 = transmit-,
other pins not used. When the TP crossover push-button is UP, the pins of the RJ-
45 port are per the standard for up-links using twisted pair wiring, i.e., the transmit
and the receive pairs are exchanged: 1 = transmit+, 2 = transmit-, 3 = receive+, 6 =
receive-, other pins not used.
5.2.10 6KP8-45-2MT, 6@ 10/100Mbps RJ-45 and 2@100Mb multi-mode
FX , MTRJ Small-Form-Factor
FX , MTRJ Small-Form-Factor
6KP8V
-
6KP8-45-2MT
6 Port@10/10Mbps & 2 port @100Mb
4
3
2 4 6
LK
2
Multi-Mode Fiber port
ACT
F/H
ACT
F/H
1 3 5
10/10
L
1
AC
F/H
10/100
F/H
2
10/100
1
LINK
4
3
ACTIVITY
FULL/HALF
The Magnum 6KP8-
45-2MT eight port Module is a
combo module with copper and
fiber (Small Form Factor)
MTRJ type ports. The small
sizes of MTRJ connectors give
an advantage of placing more
fiber ports on one module. The
6KP8-45-2MT is equipped with
six 10/100 RJ-45 ports and two
100Mb MTRJ fiber ports. When installed in a Magnum 6K16V Switch, it supports the
standard distances as mentioned on 5.2.3. and the LEDs also act similarly.
45
www GarrettCom com
.
.