GarrettCom DS60s Manual De Usuario

Magnum DS50 / DS60s Dual Speed Hubs                  Installation and User Guide (06/02)

 

This chapter provides instructions for installing the Magnum DS50 / DS60 Dual-

speed Hub Plus. 

 

The location of the Magnum DS50 / DS60 Dual-speed Hub Plus is dependent on the 

physical layout of the network and the workgroup to be bridge-isolated.  The compact size of 

the unit allows it to be table-top, shelf or wall-mounted. Brackets for vertical mounting are 

included. The cooling fan in the bottom of the unit exhausts air underneath the unit, so the 

space around the rubber feet should be kept clear. (An optional floor stand for edge-mounting is 

available - see GCI’s Spare Parts List - and this stand is recommended for use on carpeted 

floors.) 

 

Locate an AC receptacle that is within six feet (2 meters) of the intended Magnum 

DS50 / DS60 site.  (For optional DC power, see Appendix B). The rugged metal case of the 

Magnum DS50 / DS60 will normally protect it from accidental damage in a lab or workplace 

setting.  Keep an open area around the unit so that cooling can occur while the unit is in 

operation. 

The Magnum DS50 / DS60 Dual-speed Hub Plus can be easily mounted on a table-

top or any suitable horizontal surface.  It also has four rubber feet to provide stability without 

scratching finished surfaces.  Air from the cooling fan exhausts to the underneath side. 
 

Magnum DS60

GARRETT

100 Mb/s

COL

PWR

 

18 

.

.