GarrettCom Magnum ST80 Manual De Usuario

Stackable Personal Hubs 

 Installation and User Guide   (04/01)

 
 

11

 

.

.

 

Installation of a Stackable Personal Hub is a simple procedure.  First, locate an 

AC receptacle that is within six feet (2 meters) of the intended hub location and plug in 

the external power supply unit (provided as part of the unit).  The small DC power cord 

from the power supply plugs into the matching rear power jack of the ST80, and when 

power is applied 

the green PWR 

LED will 

illuminate. 

 

 

 

The external power supply unit supplied is one of two types; one version for 

AC input power of 115 vac 60 Hz, and one version for 230 vac 50 Hz. Examine the 

power supply to make sure the version you have is the right type for your AC power 

system.  The 115 vac version has a small transformer integral with a convenience power 

outlet plug, and a lightweight DC power cord to the applicable power jack on the hub. 

The 230 vac version has a small transformer integral with an IEC-type power plug for a 

user-supplied AC power cord with a convenience power outlet plug.  It also includes a 

lightweight DC power cord to the applicable power jack on the ST80 unit. 

 

  Stackable Personal Hubs are easily mounted on a table-top or shelf, and have 

four rubber feet to provide stability without scratching finished surfaces.  When properly 

installed, the front-mounted status LEDs will be in plain view and easy to read.  Plug in 

two or more Ethernet cable segments, and the network is in operation.