GarrettCom Magnum 6KQ Manual De Usuario

Magnum 6KQ Managed Field Switch Installation and User Guide             (04/07) 

 
 

50

.

.

 
 

The connection procedure is straightforward. Simply connect the DC leads to 

the Switch’s power terminals, positive (+) and negative (-) screws. The use of Ground 
(GND) is optional; it connects to the Switch chassis. Ensure that each lead is securely 
tightened.  

The following must be adhered to in order to conform to UL requirements: 

1.   Minimum 18 AWG cable for connection to a Centralized DC power source. 
2.   Minimum 14 AWG cable for connection to earthing wiring. 
3.   Use only with Listed 10 A circuit breaker provided in building installation. 
4.   “Complies with FDA radiation performance standards, 21 CFR subchapter J.” 

or equivalent. 

5.   Fastening torque of the lugs on the terminal block:  9 inch pound max. 
6.   Centralized DC Power Source cable securement, use at least four cable ties to 

secure the cable to the rack at least 4 inches apart with the first one located 
within 6 inches of the terminal block. 

To order the optional Dual-Source -48VDC power supply factory installed, 
order “Dual-Src48V” as a separate line item following the product model. 

 

    Example: Magnum 6KQR-48VDC  

 

 

  Dual-Src-48V   for the regular DS model  

Similarly, order the “Dual –source 24VDC” or “Dual-source 125VDC” as a 
separate line item following the product model.  

  

Example: 

for regular models  

Or Dual-Src125V-Switch 

 

 Operation of the Dual-Source Magnum 6Ks-48VDC, 24VDC and 125VDC 
Switch models are identical to that of the standard models.