GarrettCom 6K32T Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 

 
 

38

 

 

.

.

Front panel face plate package. The Front panel faceplate package includes 3 

retainer brackets and six #2-56 flat head screws. 

module separately one by one to avoid the mixing. 

NOTE for Power Substations:   In support of the IEEE 1613 Class 2 standard, GCI 

advises that, for substation applications, the serial RJ-45console  ports are 
intended for temporary connectivity to other equipment such as PCs.  Since the 
console port connection is temporary, it is excluded from IEEE 1613 packet-
loss testing per the 1613 standard-defined test procedure.  

The Magnum 6K32T & 6K32TRC chassis are combined with top, bottom and 

front panel parts and assembled together with the help of 17 Philips-head 

screws. There are 5 screws located on the front-bottom and 3 at rear-top of the 

unit and one each on the front and rear sides. First Remove the front panel 

screws (total 12) as shown in the fig 3.5.1a. Once these are removed, the front 

panel can be easily pulled out to the front. The top cover can be easily pulled 

off to the front from the chassis base, as shown in the Fig. 3.4.1b. When the 

chassis top cover has been removed, the interior of the unit is exposed. 

 Figure 3.5.1a:   Removing front panel after the screws being removed