Brocade Communications Systems IPMC5000PEF Manual De Usuario

Output from the show ip pim rp-candidate command 

Candidate-RP-advertisement
in

Indicates how time will pass before the BSR sends the next RP message. The time
is displayed in "hh:mm:ss" format.

NOTE
This field appears only if this device is a candidate RP.

RP

Indicates the IP address of the Rendezvous Point (RP).

NOTE
This field appears only if this device is a candidate RP.

group prefixes

Indicates the multicast groups for which the RP listed by the previous field is a
candidate RP.

NOTE
This field appears only if this device is a candidate RP.

Candidate-RP-advertisement
period

Indicates how frequently the BSR sends candidate RP advertisement messages.

NOTE
This field appears only if this device is a candidate RP.

Displaying RP-to-group mappings

To display RP-to-group-mappings, enter the following command at any CLI level.

device# show ip pim rp-map

Number of group-to-RP mappings: 6

Group address        RP address

-------------------------------

1 239.255.163.1  99.99.99.5

2 239.255.163.2  99.99.99.5

3 239.255.163.3  99.99.99.5

4 239.255.162.1  99.99.99.5

5 239.255.162.2  43.43.43.1

6 239.255.162.3  99.99.99.5

Syntax: show ip pim [vrf vrf-name ] rp-map

The vrf option allows you to display candidate RP-to-group mappings for the VRF instance identified by
the vrf-name variable.

The following table describes the output from this command.

Displaying RP-to-group mappings