Brocade Communications Systems IPMC5000PEF Manual De Usuario

Output of the show ip pim rp-map command 

Group address

Indicates the PIM Sparse multicast group address using the listed RP.

RP address

Indicates the IP address of the Rendezvous Point (RP) for the listed PIM Sparse group.

Displaying RP Information for a PIM Sparse group

To display RP information for a PIM Sparse group, enter the following command at any CLI level.

device# show ip pim rp-hash 239.255.162.1

  RP: 207.95.7.1, v2

    Info source: 207.95.7.1, via bootstrap

Syntax: show ip pim [vrf vrf-name ] rp-hash group-addr

The vrf option allows you to display RP information for the VRF instance identified by the vrf-name
variable.

The group-addr parameter is the address of a PIM Sparse IP multicast group.

The following table describes the output from this command.

Output from the show ip pim command 

RP

Indicates the IP address of the Rendezvous Point (RP) for the specified PIM Sparse group.

Info source Indicates the source of the RP information. It can be a static-RP configuration or learned via the

bootstrap router. If RP information is learned from the boot strap, the BSR IP address is also
displayed.

Displaying the RP set list

To display the RP set list for the device elected as BSR, enter the following command at any CLI level.

device(config)# show ip pim rp-set             

Static RP

---------

Static RP count: 2

1.51.51.4

1.51.51.5

Number of group prefixes Learnt from BSR: 1

Group prefix = 224.0.0.0/4      # RPs: 2

      RP 1: 1.51.51.1    priority=0    age=60    holdtime=150

      RP 2: 1.51.51.3    priority=0    age=30    holdtime=150

To display the RP set list for devices that are not elected as BSR, enter the following command at any
CLI level.

Brocade(config)# show ip pim rp-set

Static RP

---------

Static RP count: 2

1.51.51.4

1.51.51.5

Displaying RP Information for a PIM Sparse group