Brocade Communications Systems 53-1001762-01 Manual De Usuario

switchport access

3

switchport access

Sets the Layer 2 interface as access.

Synopsis

switchport access vlan vlan_id

no switchport access vlan

Operands

vlan vlan_id

Sets the port VLAN (PVID) to the specified vlan_id. The range of valid values is 
1-3583.

Defaults

By default, all Layer 2 interfaces are in access mode and belong to the VLAN ID 1.

Command

Modes

Interface configuration mode

Description

Use this command to set the Layer 2 interface as access. In access mode, the interface only allows 
untagged and priority tagged packets. Use the no switchport access vlan command to set the PVID 
to the default VLAN 1.

Usage

Guidelines

There are no usage guidelines for this command.

Examples

To set the Layer 2 interface PVID to 100:

switch(conf-if-te-0/19)#switchport access vlan 100

See Also

show vlan brief, show interface switchport, switchport mode, switchport trunk