Brocade Communications Systems 53-1001762-01 Manual De Usuario

switchport converged

3

switchport converged

Adds or removes native and tagged VLANs on a Layer 2 interface.

Synopsis

switchport converged { vlan vlan_id | allowed vlan {add vlan_id | all | except vlan_id | none | 
remove vlan_id} }

no switchport converged

Operands

vlan vlan_id

Sets the default native VLAN for the Layer 2 interface.

allowed vlan

Sets the VLANs that will transmit and receive through the Layer 2 interface.

add vlan_id 

Adds a VLAN to transmit and receive through the Layer2 interface. The range 
of valid values is 2-3583.

all     

Allows all VLANs to transmit and receive through the Layer 2 interface.

except vlan_id

Allows all VLANs except the VLAN ID to transmit and receive through the Layer 
2 interface. The range of valid values is 2-3583.

none    

Allows no VLANs to transmit and receive through the Layer 2 interface.

remove vlan_id Removes a VLAN that transmits and receives through the Layer 2 interface. 

The range of valid values is 2-3583.

Defaults

The default native VLAN for a converged interface is 1.

Command

Modes

Interface configuration mode

Description

Use this command to add or remove tagged VLANs on a Layer 2 interface.

Usage

Guidelines

There are no usage guidelines for this command.

Examples

To set the native VLAN of 200 on an interface:

switch(conf-if-te-0/19)#switchport converged vlan 200

To set the tagged VLAN on an interface to 100:

switch(conf-if-te-0/19)#switchport converged allowed vlan add 100

To remove the tagged VLAN 100 from the interface:

switch(conf-if-te-0/19)#switchport converged allowed vlan remove 100

See Also

show vlan brief, show interface switchport, switchport mode, switchport trunk