Black Box KV0424A-R2 Manual De Usuario

®

Usually, when you make a network connection to the ServSwitch CX with IP 
(either using the VNC viewer or a Web browser) you simply enter the IP address, 
i.e. 192.168.0.3. However, if a special configuration is necessary, then you may 
be asked to specify a port number as well as the IP address.

1  Enter the required IP address in the usual Address box,  

i.e. http://192.168.0.3

2  At the end of the IP address, add a single colon (

:) and then enter the port 

number (in this example, the required port number is 8000), 
i.e. http://192.168.0.3:8000

3  Continue with the standard 

1  Enter the required IP address in the usual ‘Server’ box,  

i.e. http://192.168.0.3

2  At the end of the IP address, add two colons (

::) and then enter the port 

number (in this example, the required port number is 8000), 
i.e. http://192.168.0.3::8000

3  Continue with the standard 

When you gain access via modem or ISDN link, the ServSwitch CX with IP 
uses standard network protocols to create a private two-device network. This 
approach ensures consistency and allows you to use exactly the same VNC 
viewer or browser to view the host servers. This is achieved using PPP (Point to 
Point Protocol) and means that you need to use a dial-up networking method to 
initiate the connection. Such software is standard with operating systems such 
as Windows, Linux and Mac OS.

1  Using a system that has a modem or ISDN adapter installed, locate the 

dial-up networking option on your system. Please refer to your system 
documentation for more information.  

2  Using the dial-up networking option, enter the telephone/ISDN number 

where the ServSwitch CX with IP can be contacted.

3  Initiate the call and when the link is made, continue with either the standard 

.