Black Box KV162A Manual De Usuario
SERVSWITCH™ MULTI
128
10.4.8 T
RANSFER
C
HANNEL
L
IST
You can use the Serial Channel-List Menu to edit the local Management Card’s channel list in any of several
ways (see Section 10.3.1). Once you finish making your desired changes, you can choose option 9 at the main
menu in order to send the new and improved channel list to another Management Card elsewhere in your
system—or to receive the list from another Card if there’s a better version elsewhere, or if changes you made to
the local Card’s list turn out to have been mistaken. When you select this option, these lines will be displayed on
the screen:
ways (see Section 10.3.1). Once you finish making your desired changes, you can choose option 9 at the main
menu in order to send the new and improved channel list to another Management Card elsewhere in your
system—or to receive the list from another Card if there’s a better version elsewhere, or if changes you made to
the local Card’s list turn out to have been mistaken. When you select this option, these lines will be displayed on
the screen:
Transfer Channel List
Configure Transfer Settings
Press SPACE to change, ENTER to accept
Transfer Option: Transmit
You can can press [Enter] to accept the default “Transmit” option, so that the local Management Card sends its
channel list to the remote Card, which replaces its own list with the local Card’s. Or you can toggle to “Receive,”
so that the local Card overwrites its own list with the remote Card’s. Either way, you will be prompted for the
address of the remote Card:
channel list to the remote Card, which replaces its own list with the local Card’s. Or you can toggle to “Receive,”
so that the local Card overwrites its own list with the remote Card’s. Either way, you will be prompted for the
address of the remote Card:
Channel address [0-H]:
As soon as you enter the address (chassis number followed by slot letter) of the remote Management Card, the
transfer begins. You will receive one of these messages to indicate the result of the attempted transfer:
transfer begins. You will receive one of these messages to indicate the result of the attempted transfer:
Successfully completed
Disconnected from remote
Invalid remote password
Remote channel busy
No response from remote
10.4.9 M
AIN
M
ENU
S
ERIAL
P
ORT
E
NABLE
/D
ISABLE
If you’re not going to be running a VT100 session on the Management Card’s serial port, you can run cable
from it to a PC running terminal-emulation software such as HyperTerminal and access the Card’s System
Management Tools Main Menu directly rather than through the User-Interface Card with On-Screen Display.
To enable this kind of communication, choose option 10 at the Main Menu. These lines will appear:
from it to a PC running terminal-emulation software such as HyperTerminal and access the Card’s System
Management Tools Main Menu directly rather than through the User-Interface Card with On-Screen Display.
To enable this kind of communication, choose option 10 at the Main Menu. These lines will appear:
Current Main Menu serial port status is DISABLED.
Press SPACE to change, ENTER to accept
Press the spacebar to toggle the setting. This line appears:
Main Menu serial port is currently ENABLED.
At this point, you must press Enter to return to the System Management Tools Main Menu. Any terminal-
emulating PC attached to the Management Card’s serial port will now be able to access this menu directly until
this setting is switched back to DISABLED.
emulating PC attached to the Management Card’s serial port will now be able to access this menu directly until
this setting is switched back to DISABLED.