HP (Hewlett-Packard) DL160 Manual De Usuario

Dimensions (H x W x D)
(with bezel)

1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)

Weight
(approximate)

Maximum
(all hard drives, power
supplies, and processors
installed)

37.00 lb (16.78 kg)

Minimum
(one hard drive, power
supply, and processor
installed)

30.00 lb (13.69 kg)

Input Requirements
(per power supply)

Rated Line Voltage

90 to 140 VAC
180 to 264 VAC

Rated Input Current

7.31A at 115VAC
3.6A at 230VAC

Rated Input Frequency

47 to 63 Hz

Rated Input Power

855W (at 100 VAC),
840.72W (at 200 VAC)

To review typical system power ratings use the Power Calculator which
is available via the online tool located at URL:

http://h30099.www3.hp.com/configurator/calc/Power%
20Calculator%20Catalog.xls

- Click on the system of interest. Example: DL160 G5
- Follow the instructions of the next screens.

Power Supply Output
(per power supply)

Rated Steady-State
Power

653.10W (at 100 VAC),
653.08W (at 200 VAC)

Operating

50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft
(1.0°C per every 305 m) above sea level to a
maximum of 10,000 ft (3050 m), no direct
sustained sunlight. Maximum rate of change
is 18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 86°F
(30°C).

Non-operating

40° to 140° F (-40° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).

Relative Humidity
(non-condensing)

Operating

10% to 85% relative humidity (Rh), 82.4°F
(28°C) maximum wet bulb temperature, non-
condensing.

Non-operating

10% to 95% relative humidity (Rh), 101.7°F
(38.7°C) maximum wet bulb temperature,
non-condensing.

Operating

10,000 ft (3050 m). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
1500 ft/min (457 m/min).

DA - 12902   Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 37