Lucent Technologies 555-233-115 Manual De Usuario
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-76
Add IP Interface Assembly
6
Upgrade to TN802B (R8)
NOTE:
The upgrade takes about 20 minutes.
1. Insert the flash disk into the right most slot on the TN802 IP trunk. On the
monitor, a dialog box assigns a drive letter with the removable media
designation; the default is D:.
designation; the default is D:.
2. Right click on Start > Explore to open the Windows NT Exploring pane
and select the drive letter indicated in step 1.
3. Double-click on Medpro and select the Setup icon.
4. Follow the Install Shield procedure to transfer all the necessary files to the
TN802 IP Interface.
NOTE:
In the Finish dialog box, select
I will restart later
. Do not
select
Restart computer
.
This would be a good time to read the Readme.txt file.
5. Click on Start > Settings > Control Panel > Services.
6. Select IP Trunk and click on Startup.
NOTE:
Do not click on Start.
7. Under Startup Type, select Disabled and click OK to disable IP Trunk
mode.
NOTE:
If IP trunk and MedPro services are both set to automatic, the
TN802B defaults to IP Trunk and MedPro features cannot be used.
TN802B defaults to IP Trunk and MedPro features cannot be used.
8. Select MedPro and click on Startup.
NOTE:
Do not click on Start.
9. Under Startup Type, select Automatic and click OK to enable MedPro
mode.