Cisco Systems SFS 7008 Manual De Usuario
45
Upgrade the Image with the CLI
To upgrade the image of the Controller card with the Command Line Interface, refer to
and the following document:
•
CLI Reference Guide
Upgrade the Image with the Chassis Manager
To upgrade the system image with the Chassis Manager web GUI, refer to the following document:
•
•
Chassis Manager User Guide
Upgrade the Image with the Element Manager
To upgrade the system image with the optionally licensed Element Manager GUI, refer to the following
documents:
•
documents:
•
Element Manager User Guide
Line Interface Management Modules (LIM)
About LIM Cards
Refer to
for specific information about the LIM modules.
About a Failed LIM Module
If you believe a line interface module has failed, contact technical support.
Refer to
Refer to
and
for monitoring
information.
Locating a Failed LIM Module
The Line Interface Management modules are located on the back of the chassis. Refer to
for
a diagram of the chassis.
Removing a LIM Card
1. Ground yourself appropriately.
2. Verify that you have a means of covering the slot before removing the module. Do not remove the
2. Verify that you have a means of covering the slot before removing the module. Do not remove the
module unless you have a replacement or a blanking panel for the slot, as overheating may occur.