Intermec SR60 Manual De Usuario
Chapter 4 — Enabling and Configuring Symbologies
86
SR60 Scanner Programmer’s Reference Manual
4
Scan the Set Minimum Label Length bar code.
5
Using the Digits bar codes on page 88, scan the digits to set
the minimum label length you identified in Step 1.
the minimum label length you identified in Step 1.
6
Scan the END bar code.
Fixed Length Format
All interfaces that are shipped with the standard factory
configuration are set to read variable length labels. If you switch
from the variable to fixed length format, the default label lengths
are 14 characters and 8 digits. All fixed length settings must be an
even number.
configuration are set to read variable length labels. If you switch
from the variable to fixed length format, the default label lengths
are 14 characters and 8 digits. All fixed length settings must be an
even number.
To set Interleaved 2 of 5 Fixed Length Format
1
Identify the fixed length settings you want to make.
Note: To set a label length less than ten, you must scan a zero
digit first and then the length digit (such as 04, 06, or 08).
digit first and then the length digit (such as 04, 06, or 08).
Variable Length Format
SET ------------------------------------------
Enable Variable Length
Format
---------
Set Minimum Label
Length
---------
END ------------------------------------------