Intermec SR60 Manual De Usuario
Chapter 4 — Enabling and Configuring Symbologies
SR60 Scanner Programmer’s Reference Manual
87
2
Scan the SET bar code on page 87.
3
Scan the Enable Fixed Length Format bar code.
4
Scan the Set First Fixed Length bar code.
5
Using the Digits bar codes on page 88, scan the digits to set
the first fixed label length. The length must be an even
number.
the first fixed label length. The length must be an even
number.
• If you need to set a second fixed length, continue with
Step 6.
• If you do not need to set a second fixed length, scan the
No Second Fixed Length bar code and skip to Step 8.
6
Scan the Set Second Fixed Length bar code.
7
Using the Digits bar codes on
page 88, scan the digits to set
the second fixed label length.
8
Scan the END bar code.
Note: To set a label length less than ten, you must scan a zero
digit first and then the length digit (such as 04, 06, or 08).
digit first and then the length digit (such as 04, 06, or 08).
Note: To set a label length less than ten, you must scan a zero
digit first and then the length digit (such as 04, 06, or 08).
digit first and then the length digit (such as 04, 06, or 08).
Fixed Length Format
SET ------------------------------------------
Enable Fixed Length
Format
---------