Schneider Electric TSXCUSBMBP Manual De Usuario
Installation
16
35011984 02/2006
Installation Requirements
Installation
Requirements
list
Requirements
list
Installation requirements are as follows:
z
Microsoft Windows XP Operating System with Service Pack 2 or greater installed
(Windows 2000 with Service Pack 4 or greater can also be used on most
computers),
(Windows 2000 with Service Pack 4 or greater can also be used on most
computers),
z
1 MB free disk space,
z
at least 256 MB RAM,
z
at least one free USB port or a USB Hub supporting USB 1.1 or greater.
Upgrading From Previous Version
Introduction
Currently, if a previous version of the TSXCUSBMBP Driver has been installed, the
Virtual Serial Port component of the driver must be manually uninstalled using
Device Manager before a new version can be installed.
Virtual Serial Port component of the driver must be manually uninstalled using
Device Manager before a new version can be installed.
How to uninstall
the Virtual Serial
Port?
the Virtual Serial
Port?
These steps must be followed to uninstall the Virtual Serial Port from your system.
Step Action
1
Close any software applications using the TSXCUSBMBP Driver.
2
Exit the TSXCUSBMBP Driver by right clicking on the Icon at the bottom then
selecting Exit Driver.
selecting Exit Driver.
3
Unplug the USB Modbus Plus Device from the USB port on the computer (or USB
Hub if using one).
Hub if using one).
4
Start up the Windows Device Manager.
On most systems, this is done by the following steps.
On most systems, this is done by the following steps.
z
Open Control Panel, System, Hardware, then Device Manager.
z
In Device Manager, left click on the + next to ABT Virtual Device. Virtual Serial
Port will now appear underneath ABT Virtual Device.
Port will now appear underneath ABT Virtual Device.
z
Right click on Virtual Serial Port and select Uninstall.
z
When prompted, confirm the device removal.
z
After ABT Virtual Device disappears from the list, close the Device Manager.