Cisco Systems ASA 5580 Manual De Usuario

The following example shows an inside load balancer that is translated to multiple IP addresses. When 
an outside host accesses one of the mapped IP addresses, it is untranslated to the single load balancer 
address. Depending on the URL requested, it redirects traffic to the correct web server. (See 

Create a network object for the addresses to which you want to map the load balancer:

ciscoasa(config)# object network myPublicIPs

ciscoasa(config-network-object)# range 209.165.201.3 209.265.201.8

Create a network object for the load balancer:

ciscoasa(config)# object network myLBHost

Define the load balancer address:

ciscoasa(config-network-object)# host 10.1.2.27

Configure static NAT for the load balancer:

ciscoasa(config-network-object)# nat (inside,outside) static myPublicIPs

Host

Outside

Inside

Load Balancer
10.1.2.27

Web Servers

Undo Translation

Undo Translation

Undo Translation

24

8

6

33