Cisco Systems ASA 5580 Manual De Usuario
3-4
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 3 Information About NAT
NAT Types
shows a typical static NAT scenario. The translation is always active so both real and remote
hosts can initiate connections.
Figure 3-1
Static NAT
Note
You can disable bidirectionality if desired.
Information About Static NAT with Port Translation
Static NAT with port translation lets you specify a real and mapped protocol (TCP or UDP) and port.
This section includes the following topics:
•
•
•
•
Information About Static NAT with Port Address Translation
When you specify the port with static NAT, you can choose to map the port and/or the IP address to the
same value or to a different value.
same value or to a different value.
shows a typical static NAT with port translation scenario showing both a port that is mapped
to itself and a port that is mapped to a different value; the IP address is mapped to a different value in
both cases. The translation is always active so both translated and remote hosts can initiate connections.
both cases. The translation is always active so both translated and remote hosts can initiate connections.
Figure 3-2
Typical Static NAT with Port Translation Scenario
10.1.1.1
209.165.201.1
Inside
Outside
10.1.1.2
209.165.201.2
1
3
00
3
5
Security
Appliance
Appliance
10.1.1.1:23
209.165.201.1:23
Inside
Outside
10.1.1.2:8080
209.165.201.2:80
1
3
0044
Security
Appliance
Appliance