Cisco Systems ASA 5585-X Manual De Usuario
16-54
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 16 Configuring the Cisco Phone Proxy
Feature History for the Phone Proxy
class sec_sip
inspect sip phone-proxy mypp
service-policy pp_policy interface data
Feature History for the Phone Proxy
lists the release history for this feature.
Table 16-7
Feature History for Cisco Phone Proxy
Feature Name
Releases
Feature Information
Cisco Phone Proxy
8.0(4)
The phone proxy feature was introduced. The following
new commands were introduced.
new commands were introduced.
cipc security-mode authenticated, clear configure ctl,
clear configure phone-proxy, cluster-ctl-file,
cluster-mode nonsecure, ctl-file (global), ctl-file (phone
proxy), debug phone proxy, disable service-settings,
media-termination address, phone-proxy, proxy-server,
record-entry, sast, show phone-proxy, show
running-config ctl, show running-config phone-proxy,
timeout secure-phones, tftp-server address.
clear configure phone-proxy, cluster-ctl-file,
cluster-mode nonsecure, ctl-file (global), ctl-file (phone
proxy), debug phone proxy, disable service-settings,
media-termination address, phone-proxy, proxy-server,
record-entry, sast, show phone-proxy, show
running-config ctl, show running-config phone-proxy,
timeout secure-phones, tftp-server address.
NAT for the media termination address
8.1(2)
The media-termination address command was changed to
allow for NAT:
allow for NAT:
[no] media-termination address ip_address interface
intf_name
intf_name
Where the interface inft_name keyword was added.
The rtp-min-port and rtp-max-ports keywords were
removed from the command syntax and included as a
separate command:
removed from the command syntax and included as a
separate command:
rtp-min-port port1 rtp-max-port port2