ZyXEL Access Point G1000 v2 91-005-124001B Manual De Usuario

ZyXEL G-1000 v2 User’s Guide

82

Chapter 8 Logs

The following table describes the fields in this screen.  

Use the Log Settings screen to configure to where the G-1000 v2 is to send logs; the schedule 
for when the G-1000 v2 is to send the logs and which logs and/or immediate alerts the G-1000 
v2 is to record. See “Logs Overview” on page 81 for more information. 

To change your G-1000 v2’s log settings, click Maintenance > Logs > Log Settings. The 
screen appears as shown.

Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full. 
Selecting many alert and/or log categories (especially Access Control) may result in many e-
mails being sent.

Table 32   View Log

Display 

The categories that you select in the Log Settings screen display in the drop-down 

list box.
Select a category of logs to view; select All Logs to view logs from all of the log 

categories that you selected in the Log Settings page. 

Time 

This field displays the time the log was recorded. 

Message

This field states the reason for the log.

Source

This field lists the source IP address and the port number of the incoming packet.

Destination 

This field lists the destination IP address and the port number of the incoming 

packet.

Notes

This field displays additional information about the log entry. 

Email Log Now 

Click Email Log Now to send the log screen to the e-mail address specified in the 

Log Settings page (make sure that you have first filled in the E-mail Log Settings 

fields in Log Settings).

Refresh

Click Refresh to renew the log screen. 

Clear Log 

Click Clear Log to delete all the logs.