ZyXEL Access Point G1000 v2 91-005-124001B Manual De Usuario

ZyXEL G-1000 v2 User’s Guide

Chapter 8 Logs

83

Figure 33   Log Settings

The following table describes the fields in this screen.

Table 33   Log Settings

E-mail Log Settings

Mail Server 

Enter the server name or the IP address of the mail server for the e-mail addresses 

specified below. If this field is left blank, logs and alert messages will not be sent via 

E-mail. 

Mail Subject

Type a title that you want to be in the subject line of the log e-mail message that the 

G-1000 v2 sends. Not all G-1000 v2 models have this field.

Send Log To 

The G-1000 v2 sends logs to the e-mail address specified in this field. If this field is 

left blank, the G-1000 v2 does not send logs via e-mail. 

Send Alerts To 

Alerts are real-time notifications that are sent as soon as an event, such as a DoS 

attack, system error, or forbidden web access attempt occurs. Enter the E-mail 

address where the alert messages will be sent. Alerts include system errors, attacks 

and attempted access to blocked web sites. If this field is left blank, alert messages 

will not be sent via E-mail. 

SMTP 

Authentication

SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for the 

Internet. SMTP enables you to move messages from one e-mail server to another.
Select the check box to activate SMTP authentication. If mail server authentication is 

needed but this feature is disabled, you will not receive the e-mail logs.

User Name

Enter the user name (up to 31 characters) (usually the user name of a mail account).