Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Tandberg Data
  4. T40
  5. Manual De Usuario

Tandberg Data T40 Manual De Usuario

Descargar
Página de 95
 
52  
Running the Library 
Figure 22. The Release Tool Inserted into the Correct Hole on the Left Lower Magazine 
  
Standby Functionality 
On the front panel a standby button is available. 
To activate Standby mode, press the button for a minimum of 2 seconds. The StorageLibrary will 
enter a standby mode in a controlled manner. The following takes place before the StorageLibrary 
goes into standby mode: 
1  Finish any StorageLibrary activity. 
2  The power to the tape drives are switched off. 
3  The display is turned off. 
4  No StorageLibrary activity is allowed until the standby button is pressed again. 
5  The green LED on the front will blink with short blinks- long intervals. 
6  To leave the standby mode, press the standby button for 2 second. The StorageLibrary will then 
restart and perform a full inventory.