Polycom 2000/4000 Manual De Usuario
Chapter 12-Network Services
12-2
IP Network Services
Two IP Services are defined for the RMX:
•
•
Management Network
•
Default IP Service (Conferencing Service)
Dial in, dial out connections and RMX management are supported within
the following IP addressing environments:
•
•
IPv6
•
IPv4
•
IPv6 & IPv4
When IPv4 is selected, IPv6 fields are not displayed and conversely when
IPv6 is selected, IPv4 fields are not displayed. When IPv6 & IPv4 is
selected both IPv6 and IPv4 fields are displayed.
For the purposes of comprehensive documentation, all screen captures in
For the purposes of comprehensive documentation, all screen captures in
this chapter show the dialog boxes as displayed with IPv6 & IPv4 selected.
For more information see "Using IPv6 Networking Addresses for RMX
For more information see "Using IPv6 Networking Addresses for RMX
Management Network (Primary)
The Management Network is used to control the RMX, mainly via the RMX
Web Client application. The Management Network contains the network
parameters, such as the IP address of the Control Unit, needed for
connection between the RMX and the RMX Web Client. This IP address
can be used by the administrator or service personnel to connect to the
Control Unit should the RMX become corrupted or inaccessible.
During First Time Power-up, the Management Network parameters can be
During First Time Power-up, the Management Network parameters can be
set either via a USB key or by using a cable to create a private network.
For more information, see the RMX 2000/4000 Getting Started Guide,
For more information, see the RMX 2000/4000 Getting Started Guide,
and Appendix G of this manual, "Configuring Direct
.