Polycom 2000/4000 Manual De Usuario

Polycom RMX 2000/4000 Administrator’s Guide

Displays the network type selected during the First 
Entry configuration. The Default IP Network icon 
indicates the selected environment.
You can select:

•

H.323: For an H.323-only Network Service. 

•

SIP: For a SIP-only Network Service.

•

H.323 & SIP: For an integrated IP Service. Both 
H.323 and SIP participants can connect to the 
MCU using this service.

Note: This field is displayed in all Default IP Service 
tabs.

Enter the address to be used by IP endpoints when 
dialing in to the MCU.

Dial out calls from the RMX are initiated from this 
address.

This address is used to register the RMX with a 
Gatekeeper or a SIP Proxy server.

RMX 2000:
Enter the IP address(es) of the media card (s) as 
provided by the network administrator:
MPM 1 and MPM 2 (if installed)
or
MPM+ 1 and MPM+ 2 (if installed).
RMX 4000:
Enter the IP address(es) of the media card (s) as 
provided by the network administrator:
MPM+ 1, and MPM+ 2, MPM+ 3, MPM+ 4 (if 
installed).
Endpoints connect to conferences and transmit call 
media (video, voice and content) via these 
addresses.

Enter the subnet mask of the MCU. 

Default value: 255.255.255.0.