Polycom 2000/4000 Manual De Usuario
Chapter 12-Network Services
12-30
2
Modify the following field:
3
Click the OK button.
Table 12-1
Ethernet Settings Parameters
Field
Description
Speed
The RMX has 3 LAN ports on the RTM-IP (Management,
Signaling and Shelf Management), and additional LAN ports
on each media card (RTM LAN) and RTM ISDN cards. The
administrator can set the speed and transmit/receive mode
manually for these ports.
Signaling and Shelf Management), and additional LAN ports
on each media card (RTM LAN) and RTM ISDN cards. The
administrator can set the speed and transmit/receive mode
manually for these ports.
Port
The LAN port number.
Note: Do not change the automatic setting of
Port 1,4 and Port 5 of the Management 2 and
Signaling 2 Networks. Any change to the speed
of these ports will not be applied.
Note: Do not change the automatic setting of
Port 1,4 and Port 5 of the Management 2 and
Signaling 2 Networks. Any change to the speed
of these ports will not be applied.
Speed
Select the speed and transmit/receive mode for
each port.
Default: Auto – Negotiation of speed and
transmit/receive mode starts at 1000 Mbits/
second Full Duplex, proceeding downward to 10
Mbits/second Half Duplex.
Note: To maximize conferencing performance,
especially in high bit rate call environments, a
1Gb connection is recommended.
each port.
Default: Auto – Negotiation of speed and
transmit/receive mode starts at 1000 Mbits/
second Full Duplex, proceeding downward to 10
Mbits/second Half Duplex.
Note: To maximize conferencing performance,
especially in high bit rate call environments, a
1Gb connection is recommended.