Polycom 2000/4000 Manual De Usuario

Chapter 15-Gateway Calls

For example, enter 3456# for IP endpoint, or 9253456# for ISDN, or 

*9253456# for PSTN phone.
To enter an IP address as the destination number, replace the periods (.) 

with asterisks (*) in the format n*n*n*n followed by the # key. For 

example, if the IP address is 172.22.188.22, enter 172*22*188*22#.
Dialing from SIP Endpoints
Optional. [MCU prefix in SIP Proxy] - the prefix with which the 

RMX is registered to the gatekeeper. 
[GW Profile ID]

 - The ID of the Gateway Profile to be used for the 

gateway call and the IVR message. 
[@domain name] 

- the RMX domain name as registered to the SIP 

Proxy.
The dialing string:
[GW Profile ID]@domain name

Optional:
[GW Profile ID]@IP address of the RMX signaling host

Optional:
[MCU prefix in SIP proxy][GW Profile ID]@domain name

Once the participant is connected to the Gateway Profile and hears the IVR 

message requesting the destination number, using the DTMF input 

keypad, the participant enters the number of the destination endpoint 

followed by the # key. PSTN numbers are identified by an * before the 

number. 
For example, enter 3456# for IP endpoint, or 9253456# for ISDN, or 

*9253456# for PSTN phone.
To enter an IP address as the destination number, replace the periods (.) 

with asterisks (*) in the format n*n*n*n followed by the # key. For 

example, if the IP address is 172.22.188.22, enter 172*22*188*22#.

The RMX does not register to the gatekeeper as a Gateway, therefore it is 

recommended to create and use the CMA Dialing Rules to enable the CMA 

Dial One Method.