Graco 310692C Manual De Usuario

✓ Relieve the pressure. 

✓ Clean the fluid and air line filters daily.

✓ Check for any fluid leakage from the gun and fluid 

hoses. 

✓ Flush the gun before changing colors and whenever 

you are done operating the gun.

Follow Pressure Relief Procedure, page 13 when 
you stop spraying and before cleaning, checking, ser-
vicing, or transporting equipment. Read warnings, 
page 3. 

Methylene chloride with formic or propionic acid is not 
recommended as a flushing or cleaning solvent with 
this gun as it will damage aluminum and nylon compo-
nents.

Solvent left in gun air passages could result in a poor quality paint finish. Do not use any cleaning method which 
may allow solvent into the gun air passages. 

Do not point the gun up while cleaning it. 

Do not immerse the gun in solvent. 

Do not wipe the gun with a cloth soaked in solvent; 
ring out the excess. 

Do not use metal tools to clean the air cap holes as 
this may scratch them; scratches can distort the 
spray pattern.